Setting up the TP-Link Extender with/without WPS is a really easy process but it does take some time and consideration. So before doing any of the technical stuff, you need to find a place where you want your extender to be.
Placement
Placing your Wifi Extender is really simple, but you need to be careful. That is because, in any scenario, the extender signal will be blocked by walls, or get interfered by other waves. So you need to plan carefully about the place you want your extender to be. The simplest way you can do so is by figuring out where exactly you need it.
First, take out your house layout and mark a place you want your signal to be. Now mark the place where the router is located. Now take your extender and place it somewhere in the middle of both places. Also, try to place it into an open area for better range.
Setup
Before you start setting up your TP-Link Extender, you must know a few things.
- IP Address
- SSID
- Password
If you don’t know about any of it then, open Command Prompt and type in ipconfig/all. Here you will all the required information. Now, type in that IP address in your browser and log in to your router. If you are still unable to log in, contact your Internet service provider for support.
Now, it is time to set your Tp-Link Extender. Basically there are two ways of doing that. But it also depends on your TP-Link Extender. If your Extender has a WPS button follow the second method for TP Link wifi extender setup with wps and if it does not then follow the first one.
Set up TP-Link Extender Without WPS Button
- First, plug-in the TP-Link Extender into a wall outlet and connect it with your PC via ethernet cable.
- Now open your browser and visit TPlinkrepeater.net.
- Here, Select Quick Setup > Region and then click on Next.
- After TP-Link Extender had done scanning your Network select your Wifi network and click Next.
- Now enter the Password and select copy from main router and click Next.
Setup With WPS Button
- First, plug in the TP-Link Extender in the Wall outlet close to your router.
- Now press the WPS button on the back of the router. After the WPS Led starts blinking, press the WPS button on your Extender.
- Wait a while as the TP-Link Extender will automatically configure to your Wifi network.
- Now check whether the connection is working or not.
If you are looking for an easy to access and reliable extender then, TP-Link RE230 New AC750 is the best option for you. TP-Link comes with several models. RE230 is the best when it comes to providing powerful Wi-Fi and eliminating the dead zones. It keeps your home connected with strong signals. You will get uninterrupted streaming throughout your house and have the mesh Network with your router. You can do the tp-link re230 manual setup using the default web address.
Here, you will learn how you can easily do the tp-link re230 setup and update the firmware without any trouble. Let’s check out the details in this article.
Easy Guideline for Login and setup of RE230 New AC750 Wi-Fi Range extender
If you are having a hard time while doing the tp-link wifi extender setup and login, there is nothing to be worried about. One way is to do the setup using the WPS button. But you can do ac750 wifi range extender setup without wps as well. Check out the simple steps for that.
- For the initial, you have to make a connection between your router and extender and the extender and the computer using the Ethernet cable.
- Then, connect your RE2330 to the power supply using the power adapter.
- For ac750 wifi range extender setup without wps button, you have to open a browser on your computer.
- Then enter the web address tplinkrepeater.net in the address bar and press enter.
- You can also use the IP address instead of the web address that is not working.
- With that, your TP-Link Login page will be loaded. Enter the Default username and password as admin and click on the Login button.
- You have to go to the Quick Setup to configure your extender and follow the instructions on the screen.
- You have to change the password for better security.
- Go to the Wireless and choose Range extender and click on the Search button and save the settings
- You have now configured your extender.
Now, you are all done with the Login and setup process with re230 installation instructions. You can enjoy your high-speed and uninterrupted internet with zero dead zones. If you are having any sort of issues while doing the setup process, you can resolve them easily with some simple troubleshooting steps.
Instructions to update RE230 New AC750 Wi-Fi Range extender firmware
Once you are done with the TP link extender setup ac750 process, you can check if there are any updates available for download. See the instruction below for the firmware update.
- First of all, you have to download the latest version of the firmware and then extract the zip file.
- Then, you have to log in to your TP-Link RE230 Wi-Fi Range extender’s management page.
- Now, you have to click on the System Tools and backup the settings.
- Go to the Firmware upgrade and click on the browse and select the downloaded file.
- Now, click on the Upgrade button and your device will automatically reboot once the upgrade is done.
- You can now check if the upgrade is done.
With the steps provided above, you will get new features added to your router. Not only that, you can resolve some issues related to the firmware update with the new update.
Conclusion
The TP-Link Extender is one of the best Extender out in the market. TP-Link also provides a wide variety of products and options, so choose them as per your need. Do remember that no matter which extender you buy, you will always get the same speed as your router. With the help of this guide, you should be able to install and configure your TP-Link Extender.
Thanks to Admin to Allow me share this Post.