Accomplish the First Time Printer Setup with our simple guidelines. The 123.hp.com/setup is very easy in such a way that it can be handled by an individual. This includes hardware and software configurations. Go ahead with the below instructions for successful printer setup:
- In the first place, place the printer box on a smooth surface.
- Secondly, discard all the packaging materials from the Printer surface.
- Now, connect the Printer with the power supply.
- After some time, turn on the Printer and set the printer preferences, includes language setting, region, etc.
- Then, proceed with the Ink cartridge installation.
- Eventually, load the preferred paper type into the paper tray.
- Slide the papers gently to avoid paper jams.
- At this point, print the alignment page.
- Next, go ahead with the 123.hp.com/setup driver download and installation.
- Note: Always use Genuine Ink cartridges for your Printer.
- Information: HP instant Ink service is also available for most of the Printer models. This service is for replacing the ink cartridges. Eventually, you will get a reminder when the cartridge is low or empty.
HP Printer Driver Download
The 123.hp.com Driver Software acts as an interface between your printer and operating device. You can experience the bliss of your printer by installing the right driver. Eventually, select the appropriate Full feature or Basic driver for your Printer model. Then download and install the Printer Software from 123.hp.com.
Full feature or full solution driver
- This driver provides a guide for easy installation. This may include instructions for connecting the printer to the local network.
- You can also avail of the printer management software for changing the print settings.
Basic driver
- This driver supports print and scan functions for all printer models.
- Note: Choose the driver which is compatible with the version of your operating device.
- Information: The version of the Operating device will be automatically detected during installation.
Driver Download for Windows
- Initially, connect the Printer and Windows device to the active network.
- Now, move onto the manufacturer’s official webpage on your computer.
- Eventually, navigate to 123.hp.com to get a direct link to the driver download page.
- Next, choose the suitable Printer Driver and tap on the download option.
- Once the HP Driver Download for Windows is complete, start installing it.
Driver Download for Mac
- Firstly, establish a network connection for Mac device and Printer.
- Next, visit the manufacturer site and type the Model number.
- Now, the screen displays the available Printer Drivers for MAC.
- At this point, select the compatible driver and click on the download using 123.hp.com.
- Wait until the driver gets downloaded, and initiate the installation wizard.
Wireless Setup Wizard
The wireless setup wizard is a simple and easy method to connect with the devices. This method is highly effective for printers with a touch panel display. Before moving on the process, know your network details.
- Initially, touch the settings icon on your printer control panel.
- Then, move onto the Network menu and select the wireless setting option.
- Next, choose the Wireless 123.hp.com/setup Wizard option from the available options.
- Now, you will notice the set of wireless networks on the screen.
- Eventually, choose your network name from the list.
- Sequentially, enter the password and configure the Wireless setup.
- If your network name is not available, then you need to add the network manually.
- Then proceed with the Wireless Setup Wizard instructions.
- Note: The wireless network must be stable for uninterrupted service. Connect both the printer and computer with the same network.
Auto Wireless Connect
It is a wireless technology that connects the printer automatically with the wireless network. It does not require any network credentials to establish the connection. Once the 123.hp.com/setup is done, you can avail of this service.
- Install the printer driver and software.
- During the installation process, choose the Connection type. And then proceed with the screen instruction.
- Information: The computer must use Windows Vista or Mac OS X 10.5 (and later versions).
WPS (Wi-Fi Protected Setup)
The WPS method offers two modes of connections; Pushbutton and Pin modes. In these two, the Pushbutton method is simple and easy. Go with the below steps for configuring the Wi-Fi Protected Setup:
- Firstly, press the Pushbutton on your HP printer.
- Then within a few minutes, activate the Pushbutton on your router. Finally, the network connection is established for your printer.
- Note: Both the Printer and Router must be capable of supporting the Pushbutton mode.
How to Resolve HP Printer Not Printing Black Properly
Several factors may cause the appearance of HP Printer Not Printing Black. Check out the list noted underneath to know about the actual reasons due to which the HP Printer Not Printing problem occurs all of sudden:
- Blockage in the Print Head Vent.
- Black ink might go out of stock.
- Driver installed on Windows against your printer may be out-of-date.
- Having internal issues in the Printer Ink cartridge.
- Printer alignment problem probably causing the same problematic hurdle.
Luckily there are some productive solutions to instantly fix the HP Printer Not Printing Black issue. In the below guide, you will learn the right way to make it eliminated from the root. So, give a glimpse over here!
How To Avoid HP Printer Not Printing Black Issue?
Always keep the following points remember if you do not want to ever again experience HP Printer Not Printing Black Problem:
- All the times you are suggested to install the genuine HP Ink cartridges.
- While manual cleaning of HP printer’s print head keeps the Printer in Switch off Mode.
- Always eradicate the shielding strip from a new cartridge, before installing.
- Never ever physically harm the ink cartridge nozzles.
- Check the ink cartridge slots properly, before adjusting them into the required slot.
Ways To Fix HP Printer Not Printing Black Ink Issue?
As per our technical knowledge and skills, we have compiled a couple of fixing guidelines for you. You can grab here suitable solving instructions for HP Printer Not Printing. So, take a brief look at the below points:
Solution 1: Remove The Blockage in the Print Head
If the printhead is clogged, then you might unable to print with black color or any other color. In such case, to fix this issue, you need to perform the following given instructed lines one-by-one:
- First and foremost, turn your printer ON by pressing the Power button on your HP Printer device.
- In the next step, you need to open up the HP Printer’s cartridge panel carefully.
- Then, let your print head be reset itself.
- Afterward, slightly remove the color units and Print head from its actual place.
- Thereafter, clean the print head properly with water and then dry it with a soft & smooth cloth.
- After cleaning and drying the print head simultaneously, place it back into its suitable place.
- Also, you have to adjust all the accessories back to their places.
- Now, try to print a test page to check the printing quality.
In case, your printer still not printing black or color ink, continue following the next solving guide.
Solution 2: Use Printer’s Tool To Examine The Ink Cartridges
Here is what you are required to execute for this:
- Make sure your printer is in Switch On mode.
- Then, slightly open the printer cartridge access door.
- Take out ink cartridges with full of awareness and also remove the empty cartridges case with new quality ink cartridges.
- Use the Printer Screen now.
- From the left corner of the screen place the (⎼) sign.
- Use the side directional arrow on the screen and look for the ‘Tool’ option.
- Press the “OK” tab on the Tool option.
- Now, you’ll see an option that determines the ink levels of the cartridges. Select it and click the OK tab.
After the cleaning process completes successfully, you can print a test page to check if this time your printer is printing black or not. If the same problem yet persists, move to the next solution.
Solution 3: Eliminate The Defective Ink Cartridges & Alignment Process
Defective ink cartridges can also be causing HP Printer Not Printing problems. Because of the faulty link, the HP printer delivers a blank page or won’t print in black color. To rectify this HP Printer Not Printing Black issue, use some simple and quick tips noted beneath:
- Switch your HP Printer ON.
- Open the printer panel full of carefulness & then let the ink cartridge transmit to the center.
- Press gently on ink units to take them out from the print head slots.
- Next check the expiration date on installed ink units. If they are really expired, replace them immediately with new genuine ones.
- Now, close the printer panel.
- Give a brief glance at the Printer Screen; there you can see some relevant information about printer alignment demo, paper loading, and calibrating color units.
- Give a click on the “OK” tab for the entire information demo once you have properly checked them out.
- The printer will then start itself to initiate alignment.
- Now print a test page and place it on the scanner.
- Information will pop on the printer screen. Hit an Ok button on it.
- Finally, your printer is been aligned completely.
You can now obtain quality printouts from your HP Printer
I Loved this Website Since i have joined i am reading informative articles and post here.