No one likes a stuck garage when they are getting late for work. The doors of the garage are used every day, which means their maintenance is also important to keep them working smoothly. You can ensure the smooth and efficient working of your garage through remote garage door service. There are multiple reasons why you should have your garage door serviced at least once or twice a year.
The service technicians consist of professionals who ensure the longevity of your garage door with preventive maintenance.
They lubricate the areas of the door, tighten up the bolts and screws, and check out if there are any issues that need to be adjusted. Your door might normally work without door service, but annual service will prevent issues from occurring in the future.
It is beneficial to ensure a monthly check of your doors.
Some of the common things that you can consider when checking your garage door include
- Ensure that your door is being closed completely without any issue
- Check if the garage door is making any types of unusual noises like clicks when you close the door or open it
- Also, check for broken glass if there is a window with the door
You can provide all this information to the service provider. The information can help the technician in diagnosing the problem and fixing it.
Clean the Garage Door
It’s not a good idea to spray the garage door track with lubricant right away if the garage door is noisy or sticky. This makes it difficult for the garage door to operate correctly. Garage door tracks are also affected.
If you apply the right garage door lubricant to the garage door track without thoroughly cleaning it beforehand, particles might build, causing the garage door to malfunction. Therefore, clean the garage door first by wiping down the inside of the door track with a damp cloth.
Sensor Rerouting for Garage Doors
The garage door sensor is an essential component of a garage door’s correct operation. They are offline and need to be readjusted, which is one of the reasons they may not perform properly. To readjust the garage door sensors, all you have to do is gently move them in the right direction and position. To be in the proper position, they must face each other. The light will flash to show that it has to be corrected. The flickering light goes off and is replaced by a bright light when correctly aligned and repositioned.
If your garage door takes much time before opening or if the door stops functioning before reaching the bottom, you might need to reset the garage door opener. The steps that you need to follow include
- Shutting down the power supply of the garage door
- Waiting for up to 10 seconds
- Turning the power on again
When the door is powered on again, press the down button so that the door reaches the bottom and closes completely.
Therefore, clean the garage door first by wiping down the inside of the door track with a damp cloth.