netgear wifi extender setup without wps

Methods for Netgear Wifi Extender Setup Without WPS

By:
On:
In: Tech
Tagged: ,
Views: 66

Have you purchased a new WiFi extender? Want to boost the WiFi network coverage and speed in your home or office? Do not have a WPS button on your router? Confused about how to connect WiFi extender to router without WPS? Well, if yes? You have reached the right place! Here, in this article, you will get to know the simple instructions for Netgear wifi extender setup without wps. The WiFi extender setup will help you in getting the best internet speed even in the deepest corner of your home or workplace.

WiFi Extender Setup

WiFi extender setup is known as the ultimate method to boost the current wireless network range and speed. A router is enough to reach the internet signals to cover a small home with a WiFi connection but it is unable to cover a large apartment or office. As a result, you are unable to stream the internet in dead zones of your home. In that case, a WiFi extender setup helps in resolving the problem. Once you complete the WiFi extender setup, the existing WiFi signals of the router rebroadcast to provide you WiFi in every corner of your home.

How to Connect Wifi Extender to Router Without WPS?

If you do not have a WPS button on your router then you can use the web-based extender setup method to connect WiFi extender to router without WPS. Look at the below steps to set up extender to router without WPS. You need to follow these steps carefully:

  • Step 1: Firstly, take an Ethernet cable. Attach one end of the Ethernet cable to the internet port of the extender and the other end to the internet port of the wireless router.
  • Step 2: If you have the same site system for some time and you have not set it up on your own then set up your WiFi extender.
  • Step 3: After that, connect the one end of the Ethernet cable to the extender’s LAN port and the other end of the Ethernet cable to the Ethernet socket of each of the devices that have a network connection.
  • Step 4: Launch a default web browser from your computer. Enter the IP address of your WiFi extender in the address bar of the web browser.
  • Step 5: Once you have entered the IP address of the extender, the router setup web page will display on the screen. Click on the wireless option and enter the wireless network name in SSID or network field. Tap on the Save button.
  • Step 6: In the next step, select the wireless protection and then choose the type of security like WEP. Enter the password for your network.
  • Step 7: Your choices might be different depending on the operating system that you are using.
  • Step 8: Next, unplug the Ethernet cables from the router and WiFi extender.
  • Step 9: At last, place your range extender within the range of the router.

By reading the above-mentioned instructions you will know how to connect WiFi extender to router without WPS. After the extender setup, you will not face any network issue and also your web browser will not close the internet connection during surfing. We hope that these steps will help you in setup extender to router without WPS without any hassle.

Netgear AC1200 Extender Setup: Manual Method

  • To install AC1200 Wifi extender plug the extender and power it on.
  • Wait for the power light to turn solid green on the Netgear ac1200 wifi extender.
  • Now grab any of your wireless devices and connect with Netgear_ext.
  • Netgear Extender Setup screen will appear on your device.
  • Create your AC1200 login account and connect Netgear WiFi Extender Setup to the home Network.

Netgear AC1200 Setup Instruction: ( W.P.S )

  • Plug the Netgear AC1200 to the electric outlet and wait for the green light to turn on.
  • Push W.P.S button on your AC1200 and the green light will blink on the extender.
  • Now within 1 – 2 minutes push the W.P.S button on your wireless router or modem.
  • So the extender is now syncing up with your main router
  • Once the green light stops flashing on your extender.
  • You will see 3 green lights on your Ac1200 wireless extender.
  • The Ac1200 is now connected to the home wireless network.

Netgear AC1200 Setup using NETGEAR Installation Assistant:

  1. To install Netgear AC1200, get a PC or mobile device.
  2. Make sure to plug the EX6120 near to the main router or modem.
  3. Once you have the solid green light on the WIFI repeater.
  4. Now go to the WIFI connection manager on your laptop or cellphone and look for the “NETGEAR_Ext” network.
  5. Connect your device with AC1200 and open a web browser.
  6. Now go on mywifiext.net . The NETGEAR installation assistant will be shown.
  7. Follow all the prompts to install your Netgear EX6120 to the existing WIFI network.
  8. Once the AC1200 setup is completed. Unplug the repeater and place it where you have a weak Wi-Fi signal.
We hope above these steps will help you to configure Netgear ac1200 wifi range extender setup

Read Other Post On this Website