The Synology RS820+ is a 4-Bay network-attached storage device, which is used to store data. It is notably devised for businesses seeking influential and centralized data management. This storage system comes along with 4 drive trays, which are more helpful for the storage system. As well, the 1GbE LAN ports are also built-in in the network-attached storage system that sustains an optional 10GbE network. The Synology RS820+ 4Bay NAS M.2 SSD adapter card helps to bring rapid data network transmission and minimize the IO latency. In addition, the storage system extensively works with Internet Connectivity. The biggest advantage of internet connectivity is that you can transfer files online. You can also get files remotely.
Furthermore, the Synology RS820+ 4-bay network storage device brings redundant power supplies to get service continuity. Also, the Synology High Availability functions also compile with the find synology that offers a steady active/passive server cluster. The setup of this storage device is not grueling. By accessing the admin panel of the storage device, you can hastily perform the wireless setup.
Common Reasons: Synology RS820+ 4Bay NAS Connection Problems
If the connection problem comes with the Synology R820 network storage system, then don’t brood. On this page, you can easily identify the solutions to this problem. But I will urge some solution to the connection problems. To recognize the solution, you need to know the reasons. Because the reasons help a lot in solving the problem and the solutions are done quickly.
- Maybe the cable that you operating is faulty or broken
- The power cable may be not plugged tightly
- The wall power supply fluctuations
- The distance of your router & storage device extremely
- Antiquated firmware of the storage device
How to troubleshoot Synology RS820+ 4Bay NAS Connection Problems?
The connection problem of the Synology network-attached storage system usually lies in hardware malfunction or network connection.
Verify the function & hardware status of the Synology NAS
To resolve the connection problem of the Synology NAS, you need to verify the inspect function and hardware status. If the Power LED indicator of the Synology NAS is off, which means your storage device has been shut down. Then, for this, you need to restart your Synology NAS. If you cannot reboot the RS820+ storage system, it could be a power adapter or other hardware problems. If the Power LED indicator of the Synology NAS keeps flashing continuously for up to 10 minutes, then it could be a motherboard malfunction.
If the power LED indicator keeps flashing that indicates your NAS is starting up or shutting down, please wait for half an hour before checking again.
Inspect the connection of your Synology RS820+ NAS in the local network
To probe the connection of the Synology network-attached storage system, you need to verify the connection in the local network. To check the connection, you have to visit the download center, install & download Synology Assistant to verify your RS820 + NAS. You can notice all the NAS devices and their position from Synology Assistant. Once you have successfully installed and run the application.
As well, to verify the connection, you have to visit the setting. To visit the setting, you can use the local IP address of the storage system. With the login password, you have to log in. Afterward, you directly approach the setting panel. Through the setting panel, you hastily configure the connection.
Probe the Power adapter
For the further solution, you have to probe the power adapter. Because many times, the power adapter is faulty so it could cause a connection problem. If the power adapter is broken, then it causes a connection problem. So for that, you have to check the power adapter properly. If the power adapter is not properly plugged into the wall power supply, you will need to plug the power adapter into the power supply. If it is useless then you can also use its other power adapter. With this solution, it is possible that the problem may get rectified. In addition, you always complete the synology rs820+ ram upgrade process. The upgrade Verison is also consequential for Synology NAS.
Test the power supply & reconnect other wall sockets
To resolve the connection error, you need to verify the power socket. Because many times there is a power socket, there is no power in it. If there is no power in the power socket, your network storage device will not turn on. If the power supply doesn’t have power, you will need to unplug the vein. You have to use such a power supply.
