A common method for adding a decorative touch to fabrics is cutwork embroidery. Similar to appliqué, you cut it out rather than adding fabric. When you do this, the spaces that were finished with the satin stitch are left open.

When you look at cutwork embroidery, it’s easy to imagine that intricate designs take weeks or months to complete; however, if you have an embroidery machine, you can make beautiful cutwork embroidery in just one afternoon. It’s as simple as using a hoop, trimming, sewing, and washing!

When you look at cutwork, it’s easy to imagine that intricate designs take weeks or even months to complete; however, if you have an embroidery machine, you can make beautiful cutwork in just one afternoon. It’s as simple as using a hoop, trimming, sewing, and washing! Outwork Embroidery Cutwork embroidery is freestanding, sewn-on embroidery on fabric. The cutwork design can be half and half freestanding on your fabric or surrounded by fabric, depending on your design and the look you want for the project.

Designs for Embroidery Cutwork:

Designs for cutwork embroidery are made specifically for cutwork. To make implementation easier, these designs include specific steps. A cut line will be added first. This will provide you with a plan of where your freestanding embroidery will be cut to look. You’ll cut along the stitched lines instead. Don’t cut the stabilizer, just the fabric if it’s attached to the fabric. A second Embroidery digitizing file will then be sewn. It will perfectly match the cutting location of your fabric. This will be your picked weaving plan and ought to appear to be like the line and cutwork plan.

Stabilizer for Embroidery Cutwork:

When you’re cutting, you don’t always realize how important a stabilizer is! Additionally, it is essential to use the appropriate stabilizer. For any cutwork embroidery project, using a cutaway stabilizer will make it difficult to remove your scissors from the design. Since cutwork embroidery is meant to be freestanding, you should make sure that nothing is left behind or visible in your work. A wash-away stabilizer is required for this method. Washing your design in hot water is all that is required to remove the stabilizer shading.

Note: Because every household’s water is unique, I would first suggest testing it with your wash-away stabilizer. Add some fabric softener or hair conditioner if hot water is not removing the stabilizer.

Fabrics for Embroidery Cutwork:

The outcomes of your cutwork embroidery projects can be influenced by the fabric you use. Fabric with too much or too little density can cause your design to move too much or not sew well. Cotton is a good choice, but you should wash your item first to make sure it doesn’t shrink after you sew it.

Threads for Embroidery Cutwork:

I recommend rayon thread for cutwork despite the fact that there are so many different kinds of thread that it is hard to figure out which one is best for the job. Rayon comes in a wide range of colors, is high-sheen, and flattering. It is suitable for intricate embroidery and has a soft feel, making it suitable for high-speed sewing. Poly should not be used, in my opinion. Poly has a high breaking point, but its synthetic nature makes it feel and look slightly spongy when the stabilizer dissolves.

Cutwork Embroidery Scissors:

You can use any embroidery scissors, but for cutwork embroidery, I recommend double-edged curved scissors that are 6 inches long. This is because of the way they are made. Because it has a curved handle, you can use it like a shovel to get into and under your fabric. The scissors have an upward-pointing blade. This is due to the fact that the blade does not penetrate anything you do not wish to cut, such as the stabilizer or the fabric’s underside. When making cutwork for embroidery, this finish also helps with precision and intricate detail, which are crucial.

Tutorial on How to Make Cutwork Embroidery:

I want to show you an adorable Easter cutwork project. A cutwork egg with an Easter bunny inside is this one. What I intend to do with them is detailed below.

Advanced embroidery patterns provide the basis for this pattern. My machine has the largest hoop size of 5 x 7, and this pattern is 5 x 8. Despite my shock, it works. Why I thought this pattern was too big for my machine when it still fits in my hoop is beyond me. However, I cannot guarantee your own machine. This pattern was my first free download from last year. They offer free designs every month. I wouldn’t buy it if it weren’t free because I’m afraid it wouldn’t work on my machine.

Step 1:

Select your attire. The use of small print is preferable. For the white thread and the first tone, I used a bright pink tone. I used an off-white tone-on-tone fabric and a pastel thread of a different color for the second. For this project, keep a fresh, sharp embroidery needle and a fully wound bobbin.

Step 2:

Hoop fabric with a stabilizer that dissolves in water on the bottom right side Both are caught in a loop. Swing hard.

Step 3:

Around the egg’s outside, a straight stitch is the first stitch. Cut a small piece of fabric from the outside of this stitch after taking your hoop out of the machine. You can see below that I cut off about half an inch. Take care to look. Inside, where I cut, there is stitching. Outside the seam, I cut an inch and a half. Keep these two things in mind: 1. Simply take your hoop out of the machine. Don’t take off your clothing from the hoop! 2. Try not to cut your water-solvent stabilizer. Just cut the texture!

For best results, cut very close to the stitching line. I was afraid to cut too close on the first sample I made, the pink one, so it was hard to clean up the frayed edges. I cut the second sample very close to the seam, about 1/32″ to 1/64″!

Step 4:

The egg’s interior design and its outline are stitched into the second stitch.

Step 5:

Once more, unplug the machine from the hoop, and only cut the fabric in the space between the rabbit and the inner egg. Keep the stabilizer in place. When cutting close to the sewing line, applique scissors are a very useful tool.

Step 6:

The entire lace’s work and design can be seen in the third stitch. That section requires the most time. While the machine works its magic, simply relax and read a few blogs.

Step 7:

The decorative stitch that connects the egg’s inner and outer linings is the fourth and final stitch. You can customize the color of the thread.

Step 8:

Separate the fabric from the hoop after removing the hoop. Submerge the entire project in water after cutting the stabilizer close to the egg’s exterior. The water-soluble stabilizer will be broken down by this. Dry, press, and enjoy!!! Check ZDIGITIZING Embroidery digitizing services.

Conclusion:

I hope this instructional video has helped you gain a better understanding of cutwork embroidery. Despite the fact that the end result may appear daunting, the procedure is simpler than you might expect. Try sewing your own cutwork embroidery design if you haven’t already! Please comment below if this tutorial was helpful to you or if you have any questions!