If you’ve ever been shocked by an electrical appliance, then you know the fear of being electrocuted is real. The good news is that most people don’t die from electrocution—and even if they do, it’s usually not a death sentence.
It’s important to build a home and install electrical fixtures in a way that minimizes electrocution dangers. By building a home in New Metro City Gujar Khan, you can ensure that you’re safe from electrocution dangers.
Many common dangers can lead to electrocution in your home or workplace including faulty wiring and extension cords.
5 common electrocution dangers in your home
Here are five common electrocution dangers
Exposed wiring
Exposed wiring occurs when the insulation of the cords of wires is damaged.
If the wires are exposed, take them inside and fix them. If this is not possible, cover them up with tape or other materials until you can get a professional to come and do it for you.
Faulty electrical outlets
Faulty electrical outlets are one of the most common causes of electrocution. Unplugged or lose electrical outlets can expose live wires and create a short circuit that could cause you to be shocked, even if you aren’t touching it.
Corroded or damaged outlets may also be dangerous because they can become a source of unwanted current flow when water penetrates them, leading to a dangerous situation in which someone touches an exposed wire while wet or moist (such as during cleaning).
Extension cords
Extension cords are a great way to power your appliances outside of the home, but they can be dangerous if not used properly. You should only use extension cords with the same voltage as the appliance you’re plugging into it.
Additionally, if an extension cord seems loose or frayed, replace it immediately with a new one; this will prevent electrocution from occurring due to electrical shorts in the wire or connectors.
When plugging in an appliance that draws lots of current like electric ranges or outdoor heaters/air conditioners, make sure there isn’t any excess slack within its cord length—this could lead directly to potential electrical danger.
DIY wiring projects
Electrocution is a serious risk when you’re working on your own. If you’re not sure what to do, call a professional electrician. You can get electrocuted if you touch the wrong parts of the wiring
If a power line is live and someone has just pulled out a piece of old wiring; or even worse, if there are two outlets installed in one wall and they aren’t properly fused (this means that both outlets will be live at once).
Ignoring flickering or dimming lights
Ignoring flickering or dimming lights can be a sign of electrical problems. If you notice the lights flickering, turn off the switch and check the circuit breaker. If your lights are dimming, it could be a sign of a faulty electrical outlet.
Conclusion
Hopefully, this article has helped you understand the dangers of electrocution in your home. Remember: be aware of these dangers and how to prevent them from happening. If it happens, call a professional as soon as possible.
